Metered ion exchange water softeners
Aquasure Harmony Series 48,000 Grain Water Softener: published specifications
Quick answer
The Aquasure Harmony Series 48,000 Grain Water Softener publishes 3 specifications and currently lists at $629.99. nameplate grain capacity 48,000 grains, control type Digital metered, resin volume 1.5 cu ft. Every figure below is the manufacturer own, and nothing on this page is estimated.
The volume seller at the 48,000 grain nameplate, with a metered digital control head so it regenerates on water used rather than on a clock.
This sheet exists because comparing two pieces of water treatment equipment usually means opening two listings in two tabs and reading past the marketing. Everything Aquasure publishes for this unit is in one table below, followed by the same figures for the nearest alternatives in its category.
Published specifications
Aquasure publishes 3 figures for the Aquasure Harmony Series 48,000 Grain Water Softener.
Published figure A published standard, regulatory limit, unit conversion or manufacturer specification. It does not change because somebody disagrees with it.
| Specification | Value |
|---|---|
| Nameplate grain capacity | 48,000 grains |
| Control type | Digital metered |
| Resin volume | 1.5 cu ft |
What the manufacturer says
The listing bullets below are the manufacturer own words, reproduced rather than paraphrased so that anything claimed here can be attributed to them rather than to us. Marketing language in this category is unusually loose, and a claim that a unit is certified is worth checking against a standard number and a specific claim.
These are Aquasure own claims for the Aquasure Harmony Series 48,000 Grain Water Softener, quoted rather than rewritten.
Published figure A published standard, regulatory limit, unit conversion or manufacturer specification. It does not change because somebody disagrees with it.
| Manufacturer claim |
|---|
| PERFECTLY DESIGNED FOR 3-4 BATHROOMS The Aquasure Harmony Series is the professional grade water softener that delivers ultra-softened water to every outlet throughout your entire home. |
| HIGHLY EFFICIENT Rated to treat 48,000 Grains of hardness by removing skin damaging hard minerals like calcium and magnesium that clog up the skin pore and causes irritation. Triple Purpose Sediment/Carbon/Zinc pre-filter effectively removes 99% of water contaminants such as chlorine, VOCs, pesticides, bad odors, taste, soil, silt, sand, rust, heavy metals, and sediment. |
| PROTECTS YOUR APPLIANCES Reduces water hardness and eliminates scale buildup while preventing damage to your plumbing and prolonging the lifespan of household appliances such as washing machine, dishwasher, water heater, etc. |
| AUTOMATIC DIGITAL METERED CONTROL HEAD Comes with a fully programmable backlit digital display which allows you to easily customize your auto-flush intervals depending on your incoming water quality and water usage. Also allows for easy monitoring and hassle-free maintenance. |
| PREMIUM QUALITY Every Aquasure Water Softener is constructed with a high-strength, corrosion-resistant, fiberglass-lined polyethylene tank, durable bypass valve, and prefilled premium-grade resin. Besides the 30-day money-back, Aquasure stands behind its products by providing 5-year extended manufacturer warranty and life-time free US based tech support when you activate your product online within 60 days. |
Against the nearest alternatives
The closest products by price in the same category, with the same published figures side by side. A cell reading "not published" means that maker does not state the figure, which is frequently the most useful thing on the row.
| Specification | Aquasure Harmony Series 48,000 Grain Water Softener | Kenmore 350 Water Softener, 32,000 Grain | Aquasure Harmony Series 40,000 Grain Water Softener | GE Smart Water Softener, 35,000 Grain |
|---|---|---|---|---|
| Price | $629.99 | $626.88 | $579.99 | $699.00 |
| Nameplate grain capacity | 48,000 grains | 32,000 grains | 40,000 grains | 35,000 grains |
| Control type | Digital metered | not published | Digital metered | not published |
| Resin volume | 1.5 cu ft | not published | 1.25 cu ft | not published |
| Format | not published | All in one cabinet | not published | All in one cabinet |
| Connectivity | not published | not published | not published | Wi-Fi |
Every figure above is the manufacturer own published specification. Where a maker does not publish a figure the cell reads "not published" rather than carrying an estimate. A blank in a certification row is the finding rather than a gap: a certification covers a specific claim under a specific standard, so a system with no standard number stated has not necessarily been tested for anything you are buying it to do.
What is not on this page
Anything Aquasure does not publish. We do not estimate a missing figure, interpolate one from a neighbouring model, or repeat a number from a forum. In this category the specifications are certified capacities and contaminant claims, and a reader comparing two products on a grid cannot tell a published certification from an estimate, so an estimate that reads as a certification is a safety problem rather than a gap.
In particular, no row on this page asserts what this unit removes unless the manufacturer states a certification and a standard number. A certification covers specific claims rather than the whole unit, so "certified" with no standard number attached is not a reduction claim and is not treated as one here.
If a figure you need is missing, it is missing from the manufacturer own listing, and the place to find it is the product manual or the maker technical support rather than any third party table.
Frequently asked questions
What are the Aquasure Harmony Series 48,000 Grain Water Softener specifications?
Aquasure publishes 3 figures for this unit: nameplate grain capacity 48,000 grains, control type Digital metered, resin volume 1.5 cu ft. Everything in the table above comes from the manufacturer own listing rather than from measurement or estimation, and anything the maker does not publish is left out rather than guessed at.
How much does the Aquasure Harmony Series 48,000 Grain Water Softener cost?
It currently lists at $629.99, though prices in this category move constantly and the figure on the product page is the one that governs. Where two products are close on price, the specification table above is usually a better guide to which is right for your water than the difference between them.
Are these figures measured or published?
Published. Every number on this page comes from the Aquasure listing for this exact unit. We do not test equipment in person and we never claim to, and nothing here has been derived, interpolated or rounded from another model. That is also why some rows in the comparison table read "not published" rather than carrying a number.
Does this tell me what the unit removes?
Only where the manufacturer states a certification and a standard number. A certification covers specific claims rather than the whole unit, so NSF/ANSI 42 is aesthetic effects, 53 is health effects claim by claim, 58 is reverse osmosis and 372 is the lead content of the fitting rather than lead removal. Match the claim to your own laboratory result.
Is this the current model?
It is the unit at this listing, which is the most reliable way to identify a specific product in a category where model names get reused across generations. Manufacturers frequently sell several generations alongside each other, so check the model number in the title against the one you are comparing rather than relying on the family name.
Get the complete water treatment shopping list
Every item in the starter, complete and premium systems for both city water and well water, with running totals, in one printable list. It opens with the test kit, because that is genuinely the first purchase. No charge.
One list, no sequence of daily emails, and you can leave at any time.
Researched, not professional advice. This page is compiled from published standards, regulatory limits, manufacturer specifications and owner-review consensus, not hands-on testing. Nothing here diagnoses a water problem or says any product makes water safe to drink. Figures described as a rule of thumb are water treatment trade convention rather than published standards, and they are labeled that way wherever they appear. Test your water before you buy equipment: on city water start with the Consumer Confidence Report your utility publishes each year, and on a private well only a certified laboratory test tells you what you have. Bacteria, nitrate, lead, arsenic and PFAS are not do it yourself topics, they are invisible and tasteless, and they need a laboratory and usually a licensed professional rather than a product. Remember that a certification covers a specific claim under a specific standard, so "NSF certified" with no number attached tells you very little.