Softener salt and resin cleaner
Morton Clean and Protect Water Softener Salt Pellets, 40 lb, 2 Pack: published specifications
Quick answer
The Morton Clean and Protect Water Softener Salt Pellets, 40 lb, 2 Pack publishes 3 specifications and currently lists at $35.00. weight 40 lb, form Pellets, pack count 2. Every figure below is the manufacturer own, and nothing on this page is estimated.
Morton own listing rather than a repackager, at roughly half what the multipack resellers charge for the same pellets.
This sheet exists because comparing two pieces of water treatment equipment usually means opening two listings in two tabs and reading past the marketing. Everything Morton publishes for this unit is in one table below, followed by the same figures for the nearest alternatives in its category.
Published specifications
Morton publishes 3 figures for the Morton Clean and Protect Water Softener Salt Pellets, 40 lb, 2 Pack.
Published figure A published standard, regulatory limit, unit conversion or manufacturer specification. It does not change because somebody disagrees with it.
| Specification | Value |
|---|---|
| Weight | 40 lb |
| Form | Pellets |
| Pack count | 2 |
What the manufacturer says
The listing bullets below are the manufacturer own words, reproduced rather than paraphrased so that anything claimed here can be attributed to them rather than to us. Marketing language in this category is unusually loose, and a claim that a unit is certified is worth checking against a standard number and a specific claim.
These are Morton own claims for the Morton Clean and Protect Water Softener Salt Pellets, 40 lb, 2 Pack, quoted rather than rewritten.
Published figure A published standard, regulatory limit, unit conversion or manufacturer specification. It does not change because somebody disagrees with it.
| Manufacturer claim |
|---|
| CLEAN AND PROTECT FORMULA: Morton's advanced salt pellets help prevent buildup and maintain your water softener system's efficiency |
| CONVENIENT 2-PACK: Includes two 40 LB bags (80 lbs total) for extended use between refills |
| HIGH PURITY: Made with high-quality evaporated salt pellets that dissolve cleanly and reduce mushing and bridging in the brine tank |
| APPLIANCE LONGEVITY: Helps protect pipes, water heaters, and household appliances from damaging hard water scale deposits |
| IMPROVED WATER QUALITY: Softened water leaves skin feeling smoother, hair more manageable, and reduces soap scum on fixtures |
Against the nearest alternatives
The closest products by price in the same category, with the same published figures side by side. A cell reading "not published" means that maker does not state the figure, which is frequently the most useful thing on the row.
| Specification | Morton Clean and Protect Water Softener Salt Pellets, 40 lb, 2 Pack | Diamond Crystal Bright and Soft Water Softener Salt Pellets, 50 lb |
|---|---|---|
| Price | $35.00 | $34.95 |
| Weight | 40 lb | 50 lb |
| Form | Pellets | Pellets |
| Pack count | 2 | not published |
Every figure above is the manufacturer own published specification. Where a maker does not publish a figure the cell reads "not published" rather than carrying an estimate. A blank in a certification row is the finding rather than a gap: a certification covers a specific claim under a specific standard, so a system with no standard number stated has not necessarily been tested for anything you are buying it to do.
What is not on this page
Anything Morton does not publish. We do not estimate a missing figure, interpolate one from a neighbouring model, or repeat a number from a forum. In this category the specifications are certified capacities and contaminant claims, and a reader comparing two products on a grid cannot tell a published certification from an estimate, so an estimate that reads as a certification is a safety problem rather than a gap.
In particular, no row on this page asserts what this unit removes unless the manufacturer states a certification and a standard number. A certification covers specific claims rather than the whole unit, so "certified" with no standard number attached is not a reduction claim and is not treated as one here.
If a figure you need is missing, it is missing from the manufacturer own listing, and the place to find it is the product manual or the maker technical support rather than any third party table.
Frequently asked questions
What are the Morton Clean and Protect Water Softener Salt Pellets, 40 lb, 2 Pack specifications?
Morton publishes 3 figures for this unit: weight 40 lb, form Pellets, pack count 2. Everything in the table above comes from the manufacturer own listing rather than from measurement or estimation, and anything the maker does not publish is left out rather than guessed at.
How much does the Morton Clean and Protect Water Softener Salt Pellets, 40 lb, 2 Pack cost?
It currently lists at $35.00, though prices in this category move constantly and the figure on the product page is the one that governs. Where two products are close on price, the specification table above is usually a better guide to which is right for your water than the difference between them.
Are these figures measured or published?
Published. Every number on this page comes from the Morton listing for this exact unit. We do not test equipment in person and we never claim to, and nothing here has been derived, interpolated or rounded from another model. That is also why some rows in the comparison table read "not published" rather than carrying a number.
Does this tell me what the unit removes?
Only where the manufacturer states a certification and a standard number. A certification covers specific claims rather than the whole unit, so NSF/ANSI 42 is aesthetic effects, 53 is health effects claim by claim, 58 is reverse osmosis and 372 is the lead content of the fitting rather than lead removal. Match the claim to your own laboratory result.
Is this the current model?
It is the unit at this listing, which is the most reliable way to identify a specific product in a category where model names get reused across generations. Manufacturers frequently sell several generations alongside each other, so check the model number in the title against the one you are comparing rather than relying on the family name.
Get the complete water treatment shopping list
Every item in the starter, complete and premium systems for both city water and well water, with running totals, in one printable list. It opens with the test kit, because that is genuinely the first purchase. No charge.
One list, no sequence of daily emails, and you can leave at any time.
Researched, not professional advice. This page is compiled from published standards, regulatory limits, manufacturer specifications and owner-review consensus, not hands-on testing. Nothing here diagnoses a water problem or says any product makes water safe to drink. Figures described as a rule of thumb are water treatment trade convention rather than published standards, and they are labeled that way wherever they appear. Test your water before you buy equipment: on city water start with the Consumer Confidence Report your utility publishes each year, and on a private well only a certified laboratory test tells you what you have. Bacteria, nitrate, lead, arsenic and PFAS are not do it yourself topics, they are invisible and tasteless, and they need a laboratory and usually a licensed professional rather than a product. Remember that a certification covers a specific claim under a specific standard, so "NSF certified" with no number attached tells you very little.