Skip to content
HomeWaterCalc
Menu

Salt free conditioners and scale control

Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon: published specifications

Last updated Researched from published standards and manufacturer specifications, not tested in person

Quick answer

The Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon publishes 3 specifications and currently lists at $554.59. rated capacity 900,000 gallons, salt required None, drain connection None required. Every figure below is the manufacturer own, and nothing on this page is estimated.

A larger rated capacity than most salt free units at a mid range price, again with no drain line and no salt to carry.

This sheet exists because comparing two pieces of water treatment equipment usually means opening two listings in two tabs and reading past the marketing. Everything Tier1 publishes for this unit is in one table below, followed by the same figures for the nearest alternatives in its category.

Published specifications

Tier1 publishes 3 figures for the Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon.

Published figure A published standard, regulatory limit, unit conversion or manufacturer specification. It does not change because somebody disagrees with it.

Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon specifications
SpecificationValue
Rated capacity900,000 gallons
Salt requiredNone
Drain connectionNone required

What the manufacturer says

The listing bullets below are the manufacturer own words, reproduced rather than paraphrased so that anything claimed here can be attributed to them rather than to us. Marketing language in this category is unusually loose, and a claim that a unit is certified is worth checking against a standard number and a specific claim.

These are Tier1 own claims for the Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon, quoted rather than rewritten.

Published figure A published standard, regulatory limit, unit conversion or manufacturer specification. It does not change because somebody disagrees with it.

Tier1 published feature bullets
Manufacturer claim
TAC SCALE PREVENTION TECHNOLOGY, Uses template-assisted crystallization (TAC) media designed to convert hardness minerals into inactive crystals, helping reduce scale buildup on plumbing surfaces, fixtures, and appliances.
900,000 GALLON CAPACITY, High-capacity conditioning system designed for long-term residential use, supporting consistent scale prevention performance over extended service intervals based on household demand and incoming conditions.
SALT-FREE OPERATION, Operates without salt, backwashing, or regeneration cycles, helping reduce maintenance while avoiding discharge associated with traditional softening systems.
HELPS REDUCE EXISTING SCALE, Conditioned flow can help break down some existing buildup within plumbing over time, which may temporarily loosen deposits as the system continues to operate.
UPFLOW LOW-MAINTENANCE DESIGN, Simple in and out head eliminates moving parts, supporting reliable operation without electricity while allowing installation in basements, garages, or utility spaces.

Against the nearest alternatives

The closest products by price in the same category, with the same published figures side by side. A cell reading "not published" means that maker does not state the figure, which is frequently the most useful thing on the row.

Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon against its nearest alternatives
Specification Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon NuvoH2O Citrus Based Salt Free Water Softener System A. O. Smith Whole House Salt Free Scale Control System
Price $554.59$635.93$399.99
Rated capacity 900,000 gallonsnot published600,000 gallons
Salt required NoneNoneNone
Drain connection None requirednot publishedNone required
Mechanism not publishedCitric acid chelationnot published

Every figure above is the manufacturer own published specification. Where a maker does not publish a figure the cell reads "not published" rather than carrying an estimate. A blank in a certification row is the finding rather than a gap: a certification covers a specific claim under a specific standard, so a system with no standard number stated has not necessarily been tested for anything you are buying it to do.

What is not on this page

Anything Tier1 does not publish. We do not estimate a missing figure, interpolate one from a neighbouring model, or repeat a number from a forum. In this category the specifications are certified capacities and contaminant claims, and a reader comparing two products on a grid cannot tell a published certification from an estimate, so an estimate that reads as a certification is a safety problem rather than a gap.

In particular, no row on this page asserts what this unit removes unless the manufacturer states a certification and a standard number. A certification covers specific claims rather than the whole unit, so "certified" with no standard number attached is not a reduction claim and is not treated as one here.

If a figure you need is missing, it is missing from the manufacturer own listing, and the place to find it is the product manual or the maker technical support rather than any third party table.

Frequently asked questions

What are the Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon specifications?

Tier1 publishes 3 figures for this unit: rated capacity 900,000 gallons, salt required None, drain connection None required. Everything in the table above comes from the manufacturer own listing rather than from measurement or estimation, and anything the maker does not publish is left out rather than guessed at.

How much does the Tier1 Salt Free Whole House Scale Prevention System, 900,000 Gallon cost?

It currently lists at $554.59, though prices in this category move constantly and the figure on the product page is the one that governs. Where two products are close on price, the specification table above is usually a better guide to which is right for your water than the difference between them.

Are these figures measured or published?

Published. Every number on this page comes from the Tier1 listing for this exact unit. We do not test equipment in person and we never claim to, and nothing here has been derived, interpolated or rounded from another model. That is also why some rows in the comparison table read "not published" rather than carrying a number.

Does this tell me what the unit removes?

Only where the manufacturer states a certification and a standard number. A certification covers specific claims rather than the whole unit, so NSF/ANSI 42 is aesthetic effects, 53 is health effects claim by claim, 58 is reverse osmosis and 372 is the lead content of the fitting rather than lead removal. Match the claim to your own laboratory result.

Is this the current model?

It is the unit at this listing, which is the most reliable way to identify a specific product in a category where model names get reused across generations. Manufacturers frequently sell several generations alongside each other, so check the model number in the title against the one you are comparing rather than relying on the family name.

Get the complete water treatment shopping list

Every item in the starter, complete and premium systems for both city water and well water, with running totals, in one printable list. It opens with the test kit, because that is genuinely the first purchase. No charge.

One list, no sequence of daily emails, and you can leave at any time.

Researched, not professional advice. This page is compiled from published standards, regulatory limits, manufacturer specifications and owner-review consensus, not hands-on testing. Nothing here diagnoses a water problem or says any product makes water safe to drink. Figures described as a rule of thumb are water treatment trade convention rather than published standards, and they are labeled that way wherever they appear. Test your water before you buy equipment: on city water start with the Consumer Confidence Report your utility publishes each year, and on a private well only a certified laboratory test tells you what you have. Bacteria, nitrate, lead, arsenic and PFAS are not do it yourself topics, they are invisible and tasteless, and they need a laboratory and usually a licensed professional rather than a product. Remember that a certification covers a specific claim under a specific standard, so "NSF certified" with no number attached tells you very little.